Fire Alarm & Emergency Standard 300/500v

Mounting Device High quality polyamid clamps with various combinations of screw and dowel. Stainless steel bracket. Stainless steel fixing sets (J-clamo, dowel and nut) in various qualities. Applicatory cable ties for the fixing of the sensor cables onto messenger...

Cabinets 7-18 High Units 19" wall mounted cabinet, 12 height units, prepared for one LISTcontroller, two relay modules, one power supply PS 2402 and one fibre optic converter. Alternatively:  19" wall mounted cabinet, 18 height units, ready for two...

SR 114H 4 Core+E 1.5 Red (CC 20)    

Combustion behaviour  UL 94 V-0, self-extinguishing  EN 60695-11-10 / IEC 60695-11-10  VDE 0471 part 11-10  CSA C 22.2 Ordering Information  Interconnection Box CBO 20/0 Art.-no.: G00534 (to link two SEC 20 sensor cables)  Connection Box CBO 20/1 Art.-no.: G00535 (to...

Connection Module CCM 3000 Connection module with over-voltage protection for one or two sensor cables SEC 20 as junction between sensor cable and connection cable CC 20.

DMU 6000-S   Data Management Unit DMU 6000-S (with visualisation software LISTgraph II, interface converter) Robust aluminium case Fan-less design Various I/O interfaces available Watchdog Operating system Windows 7 Pro 32-Bit CE / FCC Class A certified Cabinet...

Ethernet-Switch FOC LAN  Ethernet/Fast Ethernet-Switch according to IEEE 802.3  Industrial switch for DIN-rail installation Fan-less design Power supply 24 V DC  6 x standard 10/100 Base TX, RJ45 ports 1 x RJ11 port 1 x 6-pin plug-in terminal block  2 x uplink port...

External sensor ESA Features Highly resistant against corrosion, pitting and a multitude of chemicals Hermetically sealed by a thermally conductive potting compound Prismatic stainless steel housing with a 4 mm mounting bore for fitting to measurement object...

LIST cable tester LCT 20 Test unit in aluminium housing with carrying strap for the check of SEC 20 cables; enables the quick and easy check of LIST sensor cables immediately after installation or storage; incl.-chargable battery block and power supply Features ...

LISTcontroler single and loop back   Features The LISTcontroller represents the central control and evaluation unit, utilising an ARM9™ embedded processor and two additional distributed processors to continually, quickly, and reliably monitor temperatures...

Power Supply PS 240x Features Optional stand-by batteries extend operation as an uninterrupted 24 V DC supply in accordance with EN 54-4:2006 Short-circuit proof and current limited integral switch-mode power supply Constant monitoring of stand-by battery charge and...

Relay Module RELMOD Features Relay extension for LISTcontrollers to signal alarm and fault statuses to superordinate systems Up to 16 relay modules are addressable per LISTcontroller Contact multiplication programmable Activation of a single relay by multiple zones...

SEC 20 Simulator CSM 200   Features Designed to simulate sensor cable SEC 20 in test set-ups Simulation of up to 200 sensors Two temperature sensors available on-board for manual heat-up or cool-down tests Additional facilities to connect up to two sensor cables...

Sensor specifications Measurement range: -40 °C … +200 °C Measurement resolution: 0,1 °C Repeatability: 0,1 K Supply voltage: 5 V DC via LIST controller Ordering information Sensor Cable SEC 20/01 (1 m sensor spacing) Sensor Cable SEC 20/02 (2 m sensor spacing) Sensor...

Software LISTgraphII System visualisation software for the display of temperature graphics, listing and storing of temperatures and messages, storing of data and messages. Generation of a project specific drawings for the easy and precise indication of sensors in...