
Power Supply PS 240x
Features
- Optional stand-by batteries extend operation as an uninterrupted 24 V DC supply in accordance with EN 54-4:2006
- Short-circuit proof and current limited integral switch-mode power supply
- Constant monitoring of stand-by battery charge and internal resistance in accordance with EN 54-4:2006
- Maximised stand-by battery life time due to deep discharge protection and temperature compensated charging
- Quick and easy test function to perform self-test and determine stand-by battery internal resistance
- Earth fault monitoring configurable
- Front-panel status display via seven LED’s
- Acoustic fault signal
- Powder coated sheet steel housing or 19“ front-panel
- VdS approved
Specifications PS240
- Mains voltage: 230 V AC +10/-20%
- Mains frequency: 47 … 63 Hz
- Output voltage: Typ. 27,6 V DC at 20 °C
- Output current: Max. 2,3 A
- Operating temperature: -5 °C … +50 °C
- Relative humidity: Max. 95% at 40 °C (No condensation)
- Dimensions: 230,0 x 150,0 x 54,0 mm (w x h x d, power supply module only) 478,0 x 266,0 x 63,0 mm (w x h x d, mounted on 19“ front-panel, w = 19“, h = 6U)
- Weight: 0,5 kg power supply module only / 2,0 kg mounted on 19“ front-panel
- Front-panel colour: RAL 9002, grey-white
- Battery charging capacity: Up to 60 Ah, chargeable to 80% within 24 hours without load
Specifications PS2402-W
- Mains voltage: 230 V AC +10/-20%
- Mains frequency: 47 … 63 Hz
- Output voltage: Typ. 27,6 V DC at 20 °C
- Output current: Max. 2,3 A
- Operating temperature: -5 °C … +50 °C
- Relative humidity: Max. 95% at 40 °C (No condensation)
- Ingress protection: IP 30
- Dimensions: 442,0 x 462,0 x 206,0 mm (w x h x d)
- Weight: 6,7 kg (Including power supply module, but without additional components)
- Housing colour: RAL 9002, grey-white
- Battery installation: Max. two 12 V / 45 Ah within housing
- Battery charging capacity: Up to 60 Ah, chargeable to 80% within 24 hours without load
Specifications PS2408
- Mains voltage: 230 V AC +10/-20%
- Mains frequency: 47 … 63 Hz
- Output voltage: Typ. 27,6 V DC at 20 °C
- Output current: Max. 8.4 A
- Operating temperature: -5 °C … +50 °C
- Relative humidity: Max. 95% at 40 °C (No condensation)
- Dimensions: 292,0 x 220,0 x 72,0 mm (w x h x d, power supply module only) 478,0 x 266,0 x 83,0 mm (w x h x d, mounted on 19“ front-panel, w = 19“, h = 6U)
- Weight: 2,2 kg power supply module only / 3,8 kg mounted on 19“ front-panel
- Front-panel colour: RAL 9002, grey-white
- Battery charging capacity: Up to 220 Ah, chargeable to 80% within 24 hours without load
Specifications PS2408-W
- Mains voltage: 230 V AC +10/-20%
- Mains frequency: 47 … 63 Hz
- Output voltage: Typ. 27,6 V DC at 20 °C
- Output current: Max. 8,4 A
- Operating temperature: -5 °C … +50 °C
- Relative humidity: Max. 95% at 40 °C (No condensation)
- Ingress protection: IP 30
- Dimensions: 442,0 x 462,0 x 206,0 mm (w x h x d)
- Weight: 8,4 kg (Including power supply module, but without additional components)
- Housing colour: RAL 9002, grey-white
- Battery installation: Max. two 12 V / 45 Ah within housing
- Battery charging capacity: Up to 220 Ah, chargeable to 80% within 24 hours without load
Ordering information
- PS 4202 (Power supply mounted on 19“ front-panel)
- PS 2402-W (Power supply mounted in housing)
- PS 2408 (Power supply mounted on 19“ front-panel)
- PS 2408 -W (Power supply mounted in housing)
Scope of delivery
- PS 4202 with mounting accessories and documentation
- PS 2402-W with mounting accessories and documentation
- PS 2408 with mounting accessories and documentation
- PS 2408-W with mounting accessories and documentation
Universal Connection Module UCM 15
Connection Box CBO 15
d-LIST controller d-LCON
Accessories
Connection Box CBO 5
Connection Cable
Connection Module
External Sensors
Power Supply
Remote Display Unit
SEC 15 Simulator
Sensor Cable
Sensor Control Unit